Multifunctional Suction Cups for tiles leveling as well as wall support. Thank our UK friend! This suction cup is very convenient to take into your tool box, and not only for leveling the tiles, you will have a wall support for laser leveling machine. Please free to contact our service WhatsApp for discounts in case you need more quantity.
Here's some AI tips for how to use a suction cup leveler for tile paving:
Preparation
- Make sure the tiles and the surface where they'll be laid are clean. Dirt or debris can affect the adhesion of the tiles and the accuracy of leveling.
- Check that the suction cups of the leveler are clean and in good condition, with no cracks or damage that could reduce suction.
Using the Suction Cup Leveler
- Press the suction cups firmly onto the tile surface. Make sure there's good contact to create a strong suction. You can do this by pushing down on the leveler and, in some cases, actuating a lever or pump mechanism to enhance the suction.
- Once the leveler is attached, you can use it to adjust the position and level of the tile. If the tile is not level, gently lift or adjust the tile using the leveler until it's in the correct position. The leveler often has a bubble level built - in. Align the bubble in the middle of the marked area to ensure the tile is level in both the horizontal and vertical planes.
- When you're satisfied with the tile's position and level, hold it in place (you might need an assistant for this) and set the tile according to your chosen installation method, such as using tile adhesive or mortar.
- After the tile is set and the adhesive or mortar begins to set, carefully release the suction of the leveler by lifting the release tabs or using the release mechanism and remove the leveler from the tile.
